Modem 常用AT指令集

作者: 来源:网络文章时间:2005-12-16 23:42:59

Modem 常用AT指令集(8)    X1 Report basic call progress result codes and connections speeds
     (OK, CONNECT, RING, NO CARRIER (also, for busy, if enabled, and
     dial tone not detected), NO ANSWER, CONNECT XXXX, and ERROR.
   X2 Report basic call progress result codes and connections speeds,
      i.e., OK, CONNECT, RING, NO CARRIER (also, for busy, if enabled,
      and dial tone not detected), NO ANSWER, CONNECT XXXX, and ERROR.
       X3 Report basic call progress result codes and connection rate,
          i.e., OK, CONNECT, RING, NO CARRIER, NO ANSWER, CONNECT XXXX,
          BUSY,and ERROR.
        X4 Report all call progress result codes and connection rate,
           i.e., OK, CONNECT, RING, NO CARRIER, NO ANSWER, CONNECT XXXX,
           BUSY,NO DIAL TONE and ERROR.
Yn - Long Space Disconnect 长时间间隔
   Y0  Disable long space disconnect before on-hook. 禁止长空挂断

共23页 9 7 [1] [2] [3] [4] [5] [6] [7] [8] [9] [10] [11] [12] [13] [14] [15] [16] [17] [18] [19] [20] [21] [22] [23] 8 :>

Modem 常用AT指令集相关文章：

Modem 常用AT指令集相关软件：

特别声明：本站除部分特别声明禁止转载的专稿外的其他文章可以自由转载，但请务必注明出处和原始作者。文章版权归文章原始作者所有。对于被本站转载文章的个人和网站，我们表示深深的谢意。如果本站转载的文章有版权问题请联系编辑人员，我们尽快予以更正。
转载请注明来源：http://www.xgdown.com