|
路由器配置命令详细列表(2) ——>
<——设置Keepalive间隔：
router（config-if）# keepalive Number
——>
<——为本地接口指定DLCI：
router（config-if）# frame-lelay local-dlci Number
——>
<——子接口配置：
router（config-if）# interface Type Port.Subininterface-Number [ multipoint | point-to-point ]
router（config-subif）# ip unnumbered Interface
router（config-subif）# frame-lelay local-dlci Number
——>
router（config-if）# ＾z
配置标准ACL：
router（config）# Access-list Access-List-Number [ permit | deny ] source [ source-mask ] <—— Access-List-Number 范围：1～99标准ACL；100～199扩展ACL；800～899标准IPX ACL；900～999扩展IPX ACL；1000~1099 IPX SAP ACL；600～699Apple Talk ACL——>
router（config）# interface Type Port
router（config-if）# ip access-group Access-List-Number [ in | out ]
router（config-if）# ＾z
配置扩展ACL：
router（config）# access-list Access-List-Number [ permit | deny ] [ Protocol | Protocol-Number ] source source-wildcard [ Source-Port ] destination destination-wildcard [ Destination-Port ] [ established ]
router（config）# interface Type Port
router（config-if）# ip access-group Access-List-Number [ in | out ]
router（config-if）# ＾z
配置命名ACL：
router（config）# ip access-list [ standard | extended ] ACL-Name
router（config [ std- | ext- ] nacl）# [ permit | deny ] [ IP-Access-List-Test-Conditions ]
router（config [ std- | ext- ] nacl）# no [ permit | deny ] [ IP-Access-List-Test-Conditions ]
router（config [ std- | ext- ] nacl）# ＾z
router（config）# interface Type Port
router（config-if）# ip access-group [ACL-Name | 1~199 ] [ in | out ]
router（config-if）# ＾z
配置DCE时钟：
router# show controllers Type Port <——确定DCE接口——>
| 
