Cisco 3550-SMI IOS升级过程分享

Cisco 3550-SMI IOS升级过程分享(14)  a 在switch模式下，查看系统启动路径的全称
Interrupt within 5 seconds to abort boot process.
Boot process failed...
The system is unable to boot automatically.  The BOOT
environment variable needs to be set to a bootable
image.
switch: set
ASSEMBLY_REVISION_NUM=B0
BOOT=flash:c3550-smi.bin
MAC_ADDR=00:04:4D:72:87:C0
MODEL_NUM=WS-C3524-XL-EN
MODEL_REVISION_NUM=A0
MOTHERBOARD_ASSEMBLY_NUM=73-3904-11
MOTHERBOARD_SERIAL_NUM=FAB0445F1YR
POWER_SUPPLY_PART_NUM=34-0851-02
POWER_SUPPLY_SERIAL_NUM=NONE
SYSTEM_SERIAL_NUM=FAA0446W0XD
switch:
b查看flash下IOS的完全名称。
switch: dir flash:
Directory of flash:/
 
2    -rwx  1645824                  c35550-smi.bin
3    -rwx  1564                     config.text
4    drwx  6784                     html
111  -rwx  1367                     01
112  -rwx  600                      vlan.dat
114  -rwx  290                      env_vars
 
936960 bytes available (2675712 bytes used)
switch:
c把flash里面的IOS的名称改成和boot里面的一致！
switch: rename flash:c35550-smi.bin flash:c3550-smi.bin
switch:
switch:
switch: dir flash:
Directory of flash:/
 
2    -rwx  1645824                  c3550-smi.bin