|
3Com路由器启动文件丢失后的恢复(6)
Write completed
Image recovery sequence completed
C.关闭路由器电源,将左面板的DIP开关拔至原始位置(三个均朝下),然后打开路由器电源开关.路由器启动过程中使用缺省的MAC地址:08002005884,须在引导完毕后恢复原来的MAC地址.在NetLogin:提示下以root注册过程以下: //本文来自电脑软硬件应用网www.45it.com转载请注明
NetLogin:root
passWord:
Welcome to the 3Com NETBuilder
NETBuilder # mon
WARNING: Monitor mode halts normal operation.
Confirm(Y/N)?y
Abort PC=0x5CF8DA
>xd
>ma
Current MAC address in canonical form [CR=no MAC Address:]0800021b347c
Station Address - 0800021B347C
New MAC address:0800021B347C
Enter old feature flags [CR=no feature flags]:
NO flags have been entered.
Enter new feature flags [CR=no featuee flags]:
No flags have been entered.
Device is no upgraded.
|
